Novamax Proto 75 L Commercial Air Cooler For Office/Home With 1-Side Honeycomb Cooling Pads, Powerful Air Throw With Dust Filter & Mosquito Net (Grey)

It is rated for spaces up to 1,000 sq ft. Air throw is rated at 90 feet at 5,000 cfm. Measure the longest run the air has to travel and make sure it is inside that throw distance; in a taller or more open space, or one with direct sun on the walls, size up or use two units placed apart.

It draws 250 watts on a 230 V - 50 Hz supply — roughly a fifth to a tenth of what an air conditioner covering the same floor area would pull. It is inverter compatible, so it keeps running through a power cut on a domestic inverter.

Run time depends on fan speed, ambient temperature and how dry the air is — an evaporative cooler uses more water on the hottest, driest days, which is exactly when it cools best. In typical north Indian summer conditions a full 75 litre tank will see out most of a working day on medium speed. A water level indicator on the body shows when it needs topping up. It also has an auto-fill inlet, so it can be connected to a tap and left to top itself up.

It uses high-density honeycomb pads. Honeycomb presents far more wetted surface to the incoming air than wood wool, so more water evaporates per pass and the air leaving the cooler is colder. Rinse the pads through with clean water every few weeks in season and drain the tank when you put the cooler away; looked after that way a set of pads lasts several seasons.

It has fixed, manually adjustable louvers with 4 way air deflection, and runs 3 fan speeds (low, medium, high). It is operated from the control panel on the body; there is no remote.

1 Year Limited Brand Warranty on all Manufacturing Defects. Warranty of the Product is Limited to Failure and Manufacturing Defects. Not covered: defects due to external causes, accidental, physical damage, cut, burnt, misuse and missing warranty stickers or labels..

Service is on-site. To raise a claim, email service@novamaxindia.com or call +91-9258586060 and an engineer will attend the site to inspect or repair the product.